These non-metallic, reliable, leak-free, magnet drive pumps are designed for pumping aggressive, hard to handle fluids. By using rare earth magnetic technology, FTI transfer pumps give high performance from a compact, robust unit.
Capacities up to 50m3/hr and differential head up to 43 metres
Available in a choice of wetted materials, certain models can run dry for up to 30 minutes without damage
Can handle liquids at temperatures up to 105°C with specific gravities to 1.8
Vertical configuration available for sump and tank emptying
Products in the Range
Click on images below for full picture and further product information
Finish Thompson DB Series Magnetic Drive Pumps
DB Series magnetic drive pumps are the product of advanced engineering CFD design software and superior magnetic flux technology. Using powerful neodymium magnetic technology, the DB sealless mag drive pumps are an ideal replacement for mechanical sealed pumps in corrosive duty applications.
8 series of pumps covers flow rates up to 50 m3/hr and heads up to 43 metres
Multiple impeller diameters allows hydraulic requirements to be precisely met
Measurement free outer drive ensures optimum magnet alignment and easy motor installation
NPT or BSP threads, raised face adjustable flanges or union
Superior run dry ability helps protect the pump from system upset or operator error. Eliminates costly repairs and downtime
Finish Thompson SP Self-Priming Magnetic Drive Pumps
SP Series magnetic drive self-priming pumps are the product of advanced engineering CFD design software and superior magnetic flux technology. The SP series combines deep-lift capabilities and lightning-fast priming with the advantages of neodymium magnetic drive technology and corrosion resistant polypropylene and PVDF to handle the most difficult applications with no seal replacement, no leaks and the capability to run-dry without damage.
2 series of pumps cover flow rates up to 25.8 m3/hr and heads up to
23.3 m
Capable of lifting fluids from 5.5 m in less than 90 seconds
SP Series use only a fraction of the energy AOD pumps require
Durably molded from corrosion resistant polypropylene or PVDF to handle the most corrosive chemicals with ease
Multiple connections - NPT or BSP threads, adjustable flanges or union connections make it easy to connect to any system reducing installation cost and time
Finish Thompson VKC Vertical Non Metallic Seal-less Centrifugal Pumps
The combination of magnetic drive technology with traditional sump pump design eliminates many of the problems usually associated with vertical pumps. The VKC pump uses a magnetic coupling to drive the impeller so there is no need for a secondary back-up impeller, therefore the problems of aeration or foaming are removed. Also, because the barrier between the driven and driving magnets is hermetically sealed, fumes cannot escape up the pump column, so the risk of corrosion on the motor or shaft is avoided.
Available in PVDF or polypropylene, combined with absence of metallic parts or bearings means excellent chemical resistance.
Five pumps in the range covers capacities up to 23 m3/hr at differential heads to 17 metres.
Design incorporates modular components allowing pump length to be increased up to 90 cm, simply by adding 15 cm sections.
Finish Thompson DB Series Magnetic Drive Pumps
